Customer Testimonials
The GoTo Company
5 star review 5 star review 5 star review 5 star review 5 star review
The GoTo Company
"Thank you for everything! The customer has apparently found another shop to repair it. Please know, your company will be my go to company when I receive requests like this. You and your staff have been wonderful!!! Please convey to your technical staff my appreciation for their help!! Have a great weekend!! We will get them next time!! Thank you."

Suzanne R. Harlow
Customer Service Representative
Kiemle-Hankins Co.


See More Testimonials › 
Home ›  Learning Center ›  Videos ›  Detail
 

Allen Bradley Servo Motor Repair


We often see the 8500 and the MPL series of Allen Bradley servo motors in for repair. But, the more common are the 1326AB series:


like this 1326AB-B720E-21 motor that Scott is currently servicing. When we receive your motor, it is put through rigorous electrical and mechanical testing - procedures to ensure key individual components operate at high industry standards:

• Surge testing, which checks all 3 phases of the motor
• Megger, to check to see if motor is grounded
• Back EMF testing, to check the magnetic strength of the rotor
• Mechanical tolerance checks and
• Torque testing of any brake if present
• We also verify the feedback device, in this case it is a resolver, to make sure it counts correctly.

In addition, we only use OEM parts in our repairs, and every step of the process—from machining to winding—is completed in-house. Once we do all of the necessary testing, it will determine where we go during the repair:

• If the stator is shorted, it goes to our winding department for rewind, where we use high-voltage, Nano-shielded wire and special insulation for each individual slot. New leads are connected as well.
• If end bells or shaft need machining, they go to our machining center
• During a standard repair, we wash and bake the stator and rotor; during re-assembly we change bearings with high performance bearings, install new seals, replace any broken connectors, and recondition the fan assembly.

During the final run-test, it will be paired with the 1394 Allen Bradley drive test fixture to verify that it is set to the correct OEM specs. It will be tested running in both directions, starting and stopping multiple times, to match the manufacturer's torque/speed curve at a minimum of 3 different run speeds for up to 2 hours to complete the repair. Repair Zone also stocks over 100 different models of remanufactured Allen Bradley Servo Motors.

When you get an Allen Bradley motor back from Repair Zone, it looks and runs like new again, and with a 1 year warranty, we guarantee your motor will run for a very long time.

“Repair Zone, Your Allen Bradley servo motor repair experts.”

Return to All Videos link
EASA Repair Zone
Member since 1977
MMBDC Repair Zone
Michigan Minority Business
Development Council Member
EASA Accredited Member
Copyright 2021, Repair Zone

615 Andre St
Bay City, MI 48706
Phone: 989-922-0043
Email: support@repairzone.com
Owned and Operated By York Repair, Inc.
‚Äč
Payment Methods Accepted
We accept Visa We accept Mastercard We accept American Express
We accept Discover We accept eCheck We accept PayPal