Home ›  Products ›  Siemens ›  Circuit Breakers › 3RV1021-1GA10  

3RV1021-1GA10

 

Siemens

Circuit Breakers

Item Description

  • Manufacturer: Siemens
  • Model #: 3RV1021-1GA10 or 3RV10211GA10
  • Circuit Breaker Adjustable AMP Range From 4.5-6.3A ON/OFF Rotary Handle Class 10 Adjustable Bimetallic Overload Relay
  • Item Weight: 1 lbs.
  • Estimated Retail Price: $212.00
  • Save as much as 62% - see more below.

Buy Options In-Stock Warranty Our Price
New 1 3 Month $130.00
Remanufactured Help  Remanufactured $00.00 Out of Stock
As Is Help  As Is 1 No Warranty $80.00
 
Turn-Around Warranty Our Price
Repair Help  Repair Not Repairable Not Available
Exchange Help  Exchange Not Available

Nationwide Service

We repair and ship nationwide. It's fast, and costs less than you think.

Learn More. link




Download Our Cut Sheets

Download our cut sheets in PDF format for printing or off-line viewing.
 Repair Zone Overview  Servo Repair Overview  Electronics Repair Overview

Buy New

  • 3 Month Warranty
  • Available Today
  • This Siemens 3RV1021-1GA10 (3RV10211GA10) is available new in box and can ship immediately.

Buy As Is

  • No Warranty
  • Available Today
  • Repair Zone has 1 available in as-is condition. That means that it is available with no guarantees or warranty. It may work, but we can not fully test it. Most often, as-is items are sold and used for parts. If you are unsure about whether or not an as-is item would be useful to you, please call us before purchase.

Product Video - Servo Motor Repair Process at REPAIR ZONE

Why choose Repair Zone as your servo motor and industrial electronics repair source?

  • 1. FAST SERVICE
  • 2. Experienced Technicians
  • 3. Full Service Facility
  • 4. Huge Inventory of Motors and Parts
  • 5. Thorough Testing Procedures
  • 6. Great Customer Service
Remanufacture and Repair Process for Servo Motors

Our procedures require that all major electrical and mechanical components making up the servo motor are independently tested upon motor disassembly. You can be assured that your motor will go through the following process:

  • 1. We first run a Meg test to check and see if any moisture potentially grounded motor. If moisture has compromised the stator, the motor is disassembled and the windings are washed and baked. Afterwards, the unit is Meg tested again.

    Detailed Mechanical Tolerance Check

  • 2. We check the bearings, housing, and end bells for wear and/or damage.
  • 3. We check the bearing seats to ensure that they within correct tolerance. Also, we look over the shaft to verify straightness and the condition of the shaft extension. If anything is worn or out of spec we machine it to proper specs.

    In-house Machining Center

  • 4. We check connectors, encoder covers, release voltage, and independent torque testing of all brake assemblies.
  • 5. We check to verify that each feedback device -- encoder, resolver, hall sensor, tachometer -- to make sure they are counting/functioning properly. If bad, we either repair or replace the part.
  • 6. We do a Back EMF test; this checks the magnetic strength of the rotor.

    In-house Winding Department

  • 7. We Surge Test the stator and do a complete electrical winding evaluation to verify the quality of the winding; if the stator fails we rewind it, in-house. Then we dip it in epoxy resin and bake it to set the finish on the windings.
  • 8. We replace all bearings with high grade shielded bearings for long life and performance.
  • 9. We replace all seals, O-rings, connectors, and any necessary worn or damaged part.
  • 10. Reassemble and align the motor back to manufacture specs.
  • 11. After all necessary repairs are performed; the motor is run tested with a manufacturers drive and complete servo system to simulate your machine, for data (e.g. amp, voltage, RPM). Load testing is optional and performed to match the manufacturers torque/speed curve at a minimum of 3 different run speeds.
  • 12. Buff and paint the motor and create new nameplates when needed. Our custom foam packaging system protects the motor in transit and returns to your facility in a new in box state.

Get Help Now! Repair Now

For a precise quote and a fast turnaround, Get a repair slip

Or, browse our Servo Motors for repair, exchange, or purchase.

Would you rather talk to a tech? Call us at 989-922-0043 and we would be happy to help!

Read More link

Product Image Gallery

Siemens 3RV1021-1GA10
Siemens 3RV1021-1GA10
Siemens 3RV1021-1GA10
Siemens 3RV1021-1GA10
Siemens 3RV1021-1GA10
Copyright 2016, Repair Zone

615 Andre St
Bay City, MI 48706
Phone: 989-922-0043
Email: support@repairzone.com
Owned and Operated By York Repair, Inc.
Payment Methods Accepted
We accept Visa We accept Mastercard We accept American Express
We accept Discover We accept eCheck We accept PayPal